Aramid Hydrolox® vs. Aramid Needlefelt with micro-denier cap
14 oz aramid Hydrolox® |
14 oz aramid needlefelt micro-denier cap |
||
---|---|---|---|
Support | Fiber | Scrimr | |
Weight (oz/yd2) | 13.2 | 13.7 | |
Air Permeability (cfm) | Min: 25 Max: 40 |
Min: 31.3 Max: 42.4 |
|
Thickness (mil) | Min: 75 Max: 90 |
Min: 78 Max: 85 |
|
Mullens Burst (psi) | 550 | 483 | |
Tensile (MD lbf) (Average) | 250 | 217 | |
Tensile (CD lbf) (Average) | 320 | 307 | |
Elongation @ 11.24 lbf (%) | 1.5 | 1.0 | |
Heat Stability (% Shrinkage at 450 F) | 1.0 | 0.5 | |
VDI Test Data: (ASTM D6830-02) | |||
Total of Abs [mg] | 1.2 | 1.3 | |
Total Efficiency % | 99.993 | 99.993 | |
Total Emissions % | 0.007 | 0.007 | |
Clean Gas Concentration [mg/m3] | 0.11 | 0.12 |

The property values listed in this specification are determined through statistical sampling from production campaigns and are subject to industry-wide tolerances. Typically, Bondex test protocol requires averaging at least ten representative measurements to produce a reported value, and the company reserves the right to make amendments without notice. Hydrolox® is a registered trademark of Bondex, Inc.