14oz PPS
Hydrolox® HCE
16oz PPS
Hydrolox® HCE
16oz PPS scrim
supported needlefelt
w/ ePTFE
Support Fiber Fiber Fiber
Weight (oz/yd2)  13-15 15-17 15-17
Air Permeability (cfm) Min: 10
Max: 20
Min: 8
Max: 16
Min: 4
Max: 8
Thickness (mil) Min: 45
Max: 60
Min: 55
Max: 65
Min: 60
Max: 80
Mullen Burst (psi) (Minimum) 450 550 400
Tensile (MD lbf) (Minimum) 180 220 100
Tensile (CD lbf) (Minimum) 320 400 100
Elongation @ 11.24 lbf (%) 1 1 1
Heat Stability (% Shrinkage at 450) 2.0 2.0 2.0
VDI Test Data: (ASTM D6830-02)
 Total of Abs [mg] 0.3 0.3 0.4
 PM2-5 Efficiency % 100.00 99.99 99.998
 >PM2-5 Efficiency % 99.998 100.000 99.998
 Total Efficiency % 99.998 99.998 99.998
 PM2-5 Emissions % 0.000 0.007 0.002
 >PM2-5 Efficiency % 0.002 0.000 0.002
 Total Emissions % 0.002 0.002 0.002
Clean Gas Concentration [µg/m3]  30 30 40

The property values listed in this specification are determined through statistical sampling from production campaigns and are subject to industry-wide tolerances. Typically, Bondex test protocol requires averaging at least ten representative measurements to produce a reported value, and the company reserves the right to make amendments without notice. Hydrolox® is a registered trademark of Bondex, Inc.